Twin Conductor Tape wire 15ft Roll, Self-Adhesive *(CK1001)
Power Strip with Switch & Fuse, 12 Outlets (CK1008-4)
Extension Cords (CK1028-6). Pack of 4. Can be used in conjunction with CK1008-4 fused
Wall Plugs Male 6 Pack (CK1004-3) These are used in conjunction with CK1008-4 fused
Junction Splice is used as the juncture point for connecting the lead-in wire to
a tape run (CK1007)
Pound in Receptacles (CK1003-1)
Pack of 4
Fluorescent bulb socket for CK1018-2 (W/Solder eye) (CK1019-1)
12 Volt Frosted Fluorescent Effect Bulb (CK1018-2)
Large Hollow Eyelets (CK1023-2)
Pack of 20
Eyelets, Spring Loaded (CK1023-6) Pack of 2
12V Bulbs Type A (CK1010-29) Pack of 4
12V Bulbs Type B (CK1010-7D) Pack of 4
PP9 Battery Connector (RSL002)
Screw-base Bulb Socket W/8 in (CK1010-8) made for use with CK1010-7D series of bulbs
Hollow Tube Plug (CK1004-2) to fit CK1003-1
Decorative Brass Outlet (CK1003A) cover to fit CK1003-1
Wall Socket Kit (RSL010) Includes
1 off Wall Socket CK1003-1
1 off Brass Facia CK1003A
2 off Plugs CK1004-2
Outlet (CK1003-1) designed for copper tape after the room in the
house has been wallpapered. The outlet is hammered into the wall where the copper
tape has been installed
Power supply 12 Volt 2A DC
Fitted with a 2.1mm jack plug.
100-240 Vac 50/60Hz (RSL005)
Power supply 12 Volt 0.5A DC
100-240 Vac 50/60Hz (RSL006)
Power supply 12 Volt 5A DC
100-240 Vac 50/60Hz
Power supply 12 Volt 3A DC
Twin Lever Connector (RSL008)
This connector is used on the back of the Dolls House so you can connect the twin
leads from a transformer.
This is not used for power supplies that are fitted with a 2.1mm connector.
Power Supply 2.1mm Convertor Board with Fuse and LED (RSL007).
This unit can be fitted to the back of the Model and converts the 2.1mm jack plug
on a power supply to the twin terminals for wiring.